The Silent Enemy: Is Your Building Blocking Your Mobile Connection?…



“Mobile data traffic is set to increase from 200gb to 440gb between 2023 and 2028.”

Article content
Comreg Report

With the ever-growing reliance on mobile signal coverage and up to 80% of mobile usage happening inside, are you ensuring you have coverage?

Intro

We have all experienced being inside a shop, hotel, office block, or an underground carpark and realising that you have no mobile coverage. As the frustration or irritation dies down, what happens next? The questions start:  What is causing this lack of coverage and what can I do? I’m hoping to help explain the cause and a viable solution in this blog series.

There are two main factors as to why mobile signal is not available inside these buildings:

·       Modern building materials and the push for more energy efficient buildings requiring better insulation.

·       The move to higher frequencies in urban areas due to network congestion.

What happens if I have no mobile signal?

·       Dropped calls:

Ever been on an important call, whether it’s your wife giving you a shopping list to get on the way home, or a call regarding a substantial business deal and the phone goes dead… the question gets arises: did I hang up inadvertently, or did they cut the call? Meanwhile, the real reason is that the building you’re in has no signal!

·       You cannot access mobile data:

This means no internet access through your cellular network, leaving you reliant on Wi-Fi. While this can be sufficient if you are in an area with trusted Wi-Fi, there are always concerns of - both about your security when connecting and the integrity of the network if others are allowed access.

·       Public EV charging stations:

This can cause numerous issues, including - but not limited to - the inability to use the relevant mobile app, process payments, and getting real-time updates on whether the charger is occupied.

·       Battery Drain:

Your phone constantly searches for a signal, which consumes significant battery power. This is a common issue, as the device's radio works overtime trying to establish a connection.

·       IoT Cellular Devices:

Some IoT devices require mobile connectivity to function in areas with little or no Wi-Fi coverage.

Moving devices typically maintain better connectivity and continuity when using mobile networks.

·       Emergency situations:

Your phone may try to connect to any network if you dial 999 or 911,however, this may not be very reliable and is only available if there is coverage on other networks. You will also be unable to call someone inside the building or receive  an emergency call from a family member.

Most common causes for mobile signal being blocked!

·       Modern Building Materials:

With the soaring costs of gas and electricity, it makes sense that buildings are now built with better insulation to be more efficient. This means using triple glazed windows, steel and concrete walls with foil backed insulation.

The biggest culprits for blocking mobile signals are triple-glazed windows (which block 97%–99%) and foil-backed insulation (which blocks over 99%). These are followed by roofing materials and concrete blocks, which reduce signals by about 75%. Insulation itself is not usually the main cause unless it contains a foil-backed layer.

·       Building structure and layout:

o   Building shape and size – Large, complex buildings with numerous internal spaces create more obstacles for signal propagation.

o   Elevator shafts are often a form of faraday cages

o   Basements and underground car parks are notoriously bad for mobile coverage because they are below ground and reinforced with concrete.

Effective Solutions

Now that you have identified a problem, it needs to be addressed.

·       First, you need to confirm if whether you are the only one experiencing this issue, and if it is limited to a single device?

In some cases performing a full power cycle on the affected device can resolve the connection problem.

·       However, more often than not, this is not a device issue but a coverage issue, - meaning that everyone using the same mobile network is experiencing the problem."

At this stage, it’s best to determine which networks the affected devices or users are trying to connect to  and identify the areas of the building where the issue occurs.

Which of the following areas are you looking to improve in your workplace using

5G-enabled technologies?

Article content
An extract from a report from Boldyn networks. (full report available)


This is where you would need to install a mobile repeater system!

How a repeater system works:

An external antenna is usually installed on the roof in a position that can receive signal from all operators.

The signal is then passed from the external antenna to the repeater, which amplifies the signal and distributes it to the required areas in the building via multiple internal antennas.

This would cover all operators for 5G, 4G, 3G and 2G.

Article content


What next?

We at Stella Doradus Europe Ltd along, with our network of distributors and installers, are here to help solve your connectivity issues.

Get in touch with me:

Carl Neumann

Senior Product Specialist

📧 Email: carl@stelladoradus.com


Or view our solutions brochures here!

Summary

With buildings being designed and retrofitted with a focus on energy efficiency, mobile signals are increasingly being 'blocked’ from entering these buildings. We all know how critical our mobile devices are to our daily lives, both personally and professionally,  especially with the increasing reliance on IoT devices. These factors are leading us to a dead-end where, while we need mobile connectivity more than ever, we are designing buildings that block these signals.

This is where a solution is needed—one that allows all people, whether they are staff or customers, and all devices to connect to their chosen mobile network. This solution must be both scalable and support multiple operators.

That’s where a mobile signal repeater from Stella Doradus will provide the solution.

Comments

Popular posts from this blog

When Signals Collide: The Hidden Battle for Clean Mobile Coverage (Part 1)

When Signals Collide: The Feedback Nightmare (Part 2)

The Invisible Highways: Understanding Mobile Frequencies